Skip to content
≡

Administrator

Developer

Tools

External Tools

6. Traps#

This chapter describes OIDs sent to the manager using traps when significant events occur in Altibase.

altiTrap#

altiTrap is a management information base (MIB) that shows the OIDs to be sent using traps.

[Figure 6-1] altiTrap MIB

altiTrap MIB uses the trap altiTrap(1) under altibase(171780) to define the OIDs to be sent to the manager. These OIDs define information such as the port number, level, trap code, message, etc.

altiNotification MIB(1)#

OID#

1.3.6.1.4.1.17180.1.1

Syntax#

OBJECT { altiTrapAddress, altiTrapLevel, altiTrapCode, altiTrapMessage,
altiTrapMoreInfo }

Description#

altiNotification is an object type (notification) that contains 5 MIBs and is used to send a trap.

Example#

# snmptrapd -f -P
2014-10-24 13:30:46 localhost [127.0.0.1]:
SNMPv2-MIB::sysUpTime.0 = Timeticks: (1017350) 2:49:33.50
SNMPv2-MIB::snmpTrapOID.0 = OID: SNMPv2-SMI::private
ALTIBASE-MIB::altiTrapAddress = STRING: 52473
ALTIBASE-MIB::altiTrapLevel = STRING: 3
ALTIBASE-MIB::altiTrapCode = STRING: 10000001
ALTIBASE-MIB::altiTrapMessage = STRING: Altibase is running.
ALTIBASE-MIB::altiTrapMoreInfo = STRING:

altiTrapAddress MIB(2)#

OID#

1.3.6.1.4.1.17180.1.2

Syntax#

DisplayString

Description#

altiTrapAddress displays the Altibase port number and is used to identify on which Altibase the trap was raised.

altiTrapLevel(3)#

OID#

1.3.6.1.4.1.17180.1.3

Syntax#

DisplayString

Description#

altiTrapLevel displays the trap priority. Each level means the following:

1: This is a very important and urgent event.

2: This is a major event.

3: This is a common event.

altiTrapCode(4)#

OID#

1.3.6.1.4.1.17180.1.4

Syntax#

DisplayString

Description#

Codes are used to distinguish traps in Altibase. Trap codes are further discussed in Trap Codes.

altiTrapMessage(5)#

OID#

1.3.6.1.4.1.17180.1.5

Syntax#

DisplayString

Description#

altiTrapMessage displays a description of the trap that was raised in Altibase.

altiTrapMoreInfo(6)#

OID#

1.3.6.1.4.1.17180.1.6

Syntax#

DisplayString

Description#

altiTrapMoreInfo displays additional information about traps raised in Altibase.


Trade Codes#

This section describes trap codes (altiTrapCode) and trap levels (altiTrapLevel) of Altibase.

Altibase Running Status#

Code#

10000001

Level#

3

Description#

Altibase Running Status displays that Altibase is currently running.

Example#

# snmptrapd -f -P
2014-10-24 13:30:46 localhost [127.0.0.1]:
SNMPv2-MIB::sysUpTime.0 = Timeticks: (1017350) 2:49:33.50
SNMPv2-MIB::snmpTrapOID.0 = OID: SNMPv2-SMI::private
ALTIBASE-MIB::altiTrapAddress = STRING: 52473
ALTIBASE-MIB::altiTrapLevel = STRING: 3
ALTIBASE-MIB::altiTrapCode = STRING: 10000001
ALTIBASE-MIB::altiTrapMessage = STRING: Altibase is running.
ALTIBASE-MIB::altiTrapMoreInfo = STRING:

Altibase UnRunning Status#

Code#

10000002

Level#

3

Description#

Altibase UnRunning Status displays that Altibase is currently not running.

Example#

# snmptrapd -f -P

2014-10-24 13:33:38 localhost [127.0.0.1]:
SNMPv2-MIB::sysUpTime.0 = Timeticks: (1034562) 2:52:25.62
SNMPv2-MIB::snmpTrapOID.0 = OID: SNMPv2-SMI::private
ALTIBASE-MIB::altiTrapAddress = STRING: 52473
ALTIBASE-MIB::altiTrapLevel = STRING: 1
ALTIBASE-MIB::altiTrapCode = STRING: 10000002
ALTIBASE-MIB::altiTrapMessage = STRING: Altibase is not running.
ALTIBASE-MIB::altiTrapMoreInfo = STRING:

Altibase Subagent Running Status#

Code#

10000003

Level#

3

Description#

Altibase Subagent Running Status displays that Altibase's subagent (altisnmpd) is running.

Example#

# snmptrapd -f -P

2014-10-24 13:40:24 localhost [127.0.0.1]:
SNMPv2-MIB::sysUpTime.0 = Timeticks: (1075187) 2:59:11.87
SNMPv2-MIB::snmpTrapOID.0 = OID: SNMPv2-SMI::private
ALTIBASE-MIB::altiTrapAddress = STRING: 22082
ALTIBASE-MIB::altiTrapLevel = STRING: 3
ALTIBASE-MIB::altiTrapCode = STRING: 10000003
ALTIBASE-MIB::altiTrapMessage = STRING: Altisnmpd is running.
ALTIBASE-MIB::altiTrapMoreInfo = STRING: coldstart

Altibase Subagent UnRunning Status#

Code#

10000004

Level#

3

Description#

Altibase Subagent UnRunning Status displays that Altibase's subagent (altisnmpd) is not running.

Example#

# snmptrapd -f -P

2014-10-24 13:40:23 localhost [127.0.0.1]:
SNMPv2-MIB::sysUpTime.0 = Timeticks: (1075030) 2:59:10.30
SNMPv2-MIB::snmpTrapOID.0 = OID: SNMPv2-SMI::private
ALTIBASE-MIB::altiTrapAddress = STRING: 21947
ALTIBASE-MIB::altiTrapLevel = STRING: 1
ALTIBASE-MIB::altiTrapCode = STRING: 10000004
ALTIBASE-MIB::altiTrapMessage = STRING: Altisnmpd is not running.
ALTIBASE-MIB::altiTrapMoreInfo = STRING: nsNotifyShutdown

Session Query Timeout#

Code#

10000101

Level#

2

Description#

Session Query Timeout displays that altiPropertyAlarmQueryTimeout is 1 and a query timeout has occurred in an Altibase session.

Example#

# snmptrapd -f -P

2014-10-24 14:00:01 localhost [127.0.0.1]:
SNMPv2-MIB::sysUpTime.0 = Timeticks: (1192924) 3:18:49.24
SNMPv2-MIB::snmpTrapOID.0 = OID: SNMPv2-SMI::private
ALTIBASE-MIB::altiTrapAddress = STRING: 52473
ALTIBASE-MIB::altiTrapLevel = STRING: 2
ALTIBASE-MIB::altiTrapCode = STRING: 10000101
ALTIBASE-MIB::altiTrapMessage = STRING: [Notify : Query Timeout] Session Closed by Server : Session ID = 2
ALTIBASE-MIB::altiTrapMoreInfo = STRING: Please check altibase_boot.log

Session Fetch Timeout#

Code#

10000102

Level#

2

Description#

Session Fetch Timeout displays that altiPropertyAlarmFetchTimeout is 1 and a fetch timeout has occurred in an Altibase session

Example#

# snmptrapd -f -P

2014-10-24 14:00:01 localhost [127.0.0.1]:
SNMPv2-MIB::sysUpTime.0 = Timeticks: (1192924) 3:18:49.24
SNMPv2-MIB::snmpTrapOID.0 = OID: SNMPv2-SMI::private
ALTIBASE-MIB::altiTrapAddress = STRING: 52473
ALTIBASE-MIB::altiTrapLevel = STRING: 2
ALTIBASE-MIB::altiTrapCode = STRING: 10000102
ALTIBASE-MIB::altiTrapMessage = STRING: [Notify : Fetch Timeout] Session Closed by Server : Session ID = 2
ALTIBASE-MIB::altiTrapMoreInfo = STRING: Please check altibase_boot.log

Session Utrans Timeout#

Code#

10000103

Level#

2

Description#

Session Utrans Timeout displays that altiPropertyAlarmUtransTimeout is 1 and a utrans timeout has occurred in an Altibase session

Example#

# snmptrapd -f -P

2014-10-24 14:12:01 localhost [127.0.0.1]:
SNMPv2-MIB::sysUpTime.0 = Timeticks: (1192924) 3:18:49.24
SNMPv2-MIB::snmpTrapOID.0 = OID: SNMPv2-SMI::private
ALTIBASE-MIB::altiTrapAddress = STRING: 52473
ALTIBASE-MIB::altiTrapLevel = STRING: 2
ALTIBASE-MIB::altiTrapCode = STRING: 10000103
ALTIBASE-MIB::altiTrapMessage = STRING: [Notify : Utrans Timeout] Session Closed by Server : Session ID = 2
ALTIBASE-MIB::altiTrapMoreInfo = STRING: Please check altibase_boot.log

Too Many Continuous Query Failure#

Code#

10000201

Level#

2

Description#

A trap raised when query execution continuously fails more than the number set in.

Example#

# snmptrapd -f -P

2014-10-24 14:12:01 localhost [127.0.0.1]:
SNMPv2-MIB::sysUpTime.0 = Timeticks: (1192924) 3:18:49.24
SNMPv2-MIB::snmpTrapOID.0 = OID: SNMPv2-SMI::private
ALTIBASE-MIB::altiTrapAddress = STRING: 52473
ALTIBASE-MIB::altiTrapLevel = STRING: 2
ALTIBASE-MIB::altiTrapCode = STRING: 10000103
ALTIBASE-MIB::altiTrapMessage = STRING: [Notify : Session Failure]  Session Failed Continuously : Session ID = 2, Count = 3
ALTIBASE-MIB::altiTrapMoreInfo = STRING: Please check altibase_boot.log